Wrap the rod with the special 90g ProFinish plain weave carbon fibre fabric, applying additional resin as you go.

If you need post padding, seat pads, special equipment padding, in fact anything you need to cover anything in strong, durable PVC fabric and foam padding then we're happy to look at this for you!This is a UK specific subreddit, r/DIY has a lot of US Specific content, things like products to use, where to get them, laws and codes that don't apply to the UK. Included in the kit is everything needed to repair a broken or fractured carbon fibre fishing pole or reinforce a vulnerable area (including adding wraps before drilling for side-puller conversions). I have done a couple of home repairs and although they have been successful the finish shows the weave.

You can either wrap the tape around several times to secure it from unwrapping itself too much or use a small piece of packing tape or similar high tack tape to hold it in place while it is being shrunk and during the cure. They are extremely easy to manage with little or no maintenance required and will keep your area safe 24 hours a day! Using the measurements of the posts we design the post protector to be round, square or rectangular to fit properly. There is plenty of epoxy resin and other materials in the kit to cover all eventualities of repair size. For a 'typical' repair you would often us a piece of cloth about 150mm wide and 150mm long which means you can get about 6 repairs out of the piece of fabric included.The kit includes a high performance epoxy resin and special ultra-smooth high strength 1k carbon fibre cloth for doing the repair as well as abrasive papers and polishing compound to take it to a professional finish. Often referred to asbasement poles, lally columns orjack posts, these below gradestructural supports oftenpresent a challenge when designing a floor plan. This gives your products the correct fit, meaning the padding will last a lot longer than ill-fitted options on the market - no movement, less wear and tear, longer life! Using some of the abrasive paper (120 grit) ‘key-up’ the inside of the broken pole so that the surface is clean and scuffed ready for the repair to be applied.