Detailed information on the processing of your personal data can be found in our Privacy Policy on the principles of personal data processing. Paint the sediment onto your model wherever rust would naturally sit, making sure to cover as much of the metallics as possible. Very light shades can be obtained by dabbing a very small quantity when it has slightly dried, similar to the “dry brushing” technique.

Allow rust paint to dry slightly on the brush for a very light effect, similar to the “dry brushing” painting technique. This image shows yellow rust dabbed onto a sheet of black plastic using a piece of kitchen roll to create a rough, broken effect.Here’s a finished shot, and then a comparison to some tanks that have been rusting underwater for a few decades. For a broken, patchy effect apply to small areas/patches at a time and allow to dry – more in some areas, less in others. Take a look at the images at the bottom of this page) The dark coloured liquid dries to a high matt rust colour in 1 to 5 minutes depending on the temperature. Using the airbrush seems to give you a result that’s more of a flat orange than a varied rust pattern, though going back afterwards with a brush you can change this.

Apply them to most fabrics, glass, mirrors, leather, timber, furniture, paper, card, metal, painted surfaces, plaster, brickwork, stone, plastics and more. Apply a small amount of water to the rust paint and either allow to dry on its own, or dry by dabbing with a piece of kitchen roll or tissue. Replace the lid quickly during use to prevent the liquid from evaporating or decant what you need to use for a job into a separate smaller pot/container with a lid. Gently press the damp flat end of kitchen roll against the dried rust paint, and twist the kitchen roll. The variations in shade were created by applying the paint in patches, more in some areas than others.I agree to receive commercial information regarding products and services offered by Eliza Sęk, Social Security Number (PESEL) 76041309022, acting as the manager of the company's successor in the succession following the death of Artur Sęk, conducting business activity under the business name Artur SĘK KROMLECH w spadku (NIP 5342445280) to the e-mail address provided by me, in accordance with the Act of July 18, 2002 on the provision of electronic services. The dark coloured liquid dries to a high matt rust colour in 1 to 5 minutes depending on the temperature. A different rust effect is obtained depending on whether a stiff brush, cloth or tissue is used to apply the paint. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. To get started, lightly paint some Darkstar Molten Metal Graphite onto the base of your model, making sure to get it onto all the places you want the rust to show through.

It’s very important to thoroughly shake the pot with the ball bearings rattling before each and every use. Spray them onto a surface and they do not cover like paint, you can still see the surface underneath. Using both water and Dirty Down Rust on my brush I stippled, jabbed, flicked and otherwise just made a mess.Anti-Static spray eliminates static on fabric, including wool, nylon and other synthetics, carpets and rugs. To fill dents and grooves in surfaces, first cover the surface with paint, and then wipe the paint off the raised areas with a damp cloth (at an angle to the grooves), leaving some of the paint trapped. Finally it’s time to take away some of the Dirty Down Rust to reveal the steel underneath and to give your model some depth.