Creality HALOT ONE Resin 3D Printer with 5.96 inches 2K Mono LCD, Intergral Light Source and Fast Printing, Precise Z-axis Module and WiFi Control, Assembled Out of The Box

Product Information

Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing.

Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model. For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are: You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.

Slicing Software

The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.) For the second print, I will create my own file, using the Chitubox software, which already offers a default profile for the Creality LD-002H, you will need version 1.6.5.

You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes. If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.Creality LD-002H, the new upgradable resin 3d printer redesigned by LD-002R, but with 130*82*160mm large building volume, allows you to print more different sizes of models. adaptable for dental modules & samples, suitable for 3d printing business start-ups and 3d printing manufacturers. The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat. You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom. Another improvement of the LD-002H, it uses a larger screen of 6 inches, which allows a larger printing area of 130mm*82mm (against 119mm*65mm for the 2R version), the printing height remains unchanged, that is 160mm. Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.

The machine offers a build volume of 130 x 82 x 160 mm that lets you print a single medium-sized model or simultaneously produce a few smaller ones. It is compatible with any 405nm UV resin that can be found on the market, allowing you to benefit from the freedom of choice. All of this makes the LD-002H a perfect device to produce tabletop miniatures, prototypes, art designs, jewels, high-precision models, dental impressions, and much more. Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly. The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.

If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.) As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it. Perhaps you do not have a clear conception of the change in size. Just imagine you just can print phone holders, small decorations, or toys before, but now you can print tall statues, dinosaurs, and even complex architectural modeling. The printer can be controlled via an easy-to-use 3.5-inch touchscreen with a neatly-looking UI that offers a crystal clear logic behind the menu options. The touchscreen displays all the relevant printing information in real-time, making it an indispensable tool for effortless standalone operation. Besides, it lets you always stay on top of the printing process and helps adjust necessary settings when needed.