Tile Doctor Pro-Clean - Professional Tile and Grout Cleaner - 1 litre

Product Information

Once done the floor looked like it had just been laid and the customer was extremely happy with the end result. The customer was thrilled with the much-improved appearance of the Marble tiles and is very reassured that they will now stay in great condition for a long time. Another satisfied client! Apply a small amount of remover to a small area of up to 2m² (25 sq. ft.), spread with a sponge or scrub brush and allow to stand for 10 to 15 minutes without drying or until coating or residue softens, do not allow stripper to to dry on surface. The following day I returned and started by taking moisture readings from different parts of the floor. Its not a good idea to apply a sealer to a damp tile and damp areas should be dried out with a heat gun first.

To remove the broken tile, I stated by cutting though the grout lines separating it from its neighbours and then carefully breaking the tile up for with a hammer action drill fitted with a chisel bit. The bits of old tile were removed and what was left of the grout was removed using a small Grout-Out tool. The homeowner could clearly see just how dirty the floor had become and satisfied that I would be able to do a good job on the floor give me the go ahead to clean the whole floor and then seal it afterwards. Cleaning and Restoring a Travertine Tiled Kitchen Floor For day-to-day cleaning I recommended Tile Doctor Neutral Tile Cleaner which is a pH neutral tile cleaning product and recommended for sealed Terracotta. It’s a mild cleaning product that won’t strip the tiles of the newly applied sealer like many strong household cleaners can. It comes in a concentrate form so a small amount goes along way.All of the resulting cleaning chemicals and soiled residue were then flushed and vacuumed away with our pressure rinsing system. This method leaves the Terracotta tiles completely fresh and clean, ready to receive a new sealer. Sealing a Terracotta Tiled a Floor Once done the burnishing work had been completed and it was time to let the floor completely dry out overnight so it would be ready for sealing the next day. Sealing a Marble Tiled Kitchen Floor The client was very happy with the result and felt they could now keep on top of keeping it clean and looking fresh moving forward. They could now remove the rugs too! If you require a free quotation to clean and seal your stone floors do get in touch.

The floor was rinsed with water and then the soiling extracted with a wet vacuum. It was important to remove the wax before starting the next stage of burnishing other wise the diamond pads used in this process will become clogged with remnants of wax. Marble tiles can be tumbled in large drums to achieve an aged and softened effect, and this can look very nice providing that the stone is adequately maintained.

Sealing Terracotta Tiles

Clean the floor using Tile Doctor Pro-Clean Heavy Duty Tile and Grout Cleaner which ishighly effective against Wax Sealers, Grease, Grime and general dirt build up.

This owners of this grand Victorian property in Exmouth were putting their home on the market and so decided to have its beautiful patterned Victorian Tiled hallway floor renovated to its former glory first. The new sealer will protect against dirt from muddy wellies, boots, and pets, keeping the dirt on the surface where it can easily be removed using an everyday cleaning product like Tile Doctor Neutral Cleaner. Once the sealer had dried, I buffed the floor with a White pad to remove any excess sealer and then ran a 1500-grit burnishing pad over the tiles which added a complimentary natural satin sheen to the tile faces throughout. I began by scrubbing in Tile Doctor Cleaner/Stripper product called Remove & Go, this emulsified and broke down the wax seal, loosened up any surface dirt and marks and cleaned up the grout lines which was significantly discoloured due to years of use. Using different grades of small diamond pads fitted to a hand buffer I began burnishing the floor tiles. I started the process with a Coarse pad and worked my way through to Medium, Fine and eventually the Very Fine pad. A small amount of lubrication in the form water is used with each pad, but no chemical products are needed, making this a completely natural process. The floor was rinsed with water afterwards to remove any slurry from the polishing. Sealing a Marble Tiled Shower Room Floor

Cleaning Terracotta Tiles

After the 1500-grit pad I put several floor fans in place to accelerate the drying of the Marble floor before applying the last pad in the burnishing system which is a very fine 3000-grit polishing pad which adds lovely shine to the Marble and is applied dry with only a little water sprayed onto the tile.