The Leather Clinic Leather Finish Sealant | Scratch Resistant, Waterproof Top Coat for Furniture, Sofas, Car Seats & More (Gloss, 100ml)

Product Information

Alcohol-based leather dyes penetrate the leather deeply, so the color goes beyond the surface. The colors are usually vibrant. However, after the dye is applied and the alcohol dries, it takes some of the moisture out of the leather along with it. Any flat surface can do. Working on the ground is possible. Even a wide board placed on some saw horses can work. The key is that it is a stable surface so that as you’re working with the dyeing, everything stays in place. Leathers dyed with alcohol-based types will then usually benefit from application of a leather conditioner to restore some of that pliability and the oils within the piece. Often, dyed leathers are coated with a finishing coat, to seal in the dye, prevent it from rubbing off, and protect the leather overall. Oil-Based Leather Dye Carnauba wax is a formula that can be applied to leather. It is usually a blend of waxes and conditioners. When applied, it serves to condition the leather while also providing a protective layer that helps resist dirt, grime, and moisture.

Currently around 90% leather available in the market is chrome tanned leather that is tanned using chromium salts and tanning liquors, however it must be closely monitored to reduce environmental impact. It is a relatively new approach that was introduced to expedite the tanning process. Tanning can be processed in as little as two weeks time and cost considerably less compared to vegetable tanning. Note that it is important that excess binder that may build up around areas of stitching should be wiped away before it dries.Reuse and recycle any materials as much as possible, and dispose of any other waste materials as responsibly as possible. Save any materials that might be able to be used for future leather dyeing.

There are a few basic steps when learning how to dye leather. Each has variations that can be performed based on the preference for the process, and the look/feel of the final product. Let’s explore each. 1. Preparation – How to Dye Leather The double shoulder cut of a leather hide comes from the shoulder area of the animals. It is essentially the entire shoulder area from the hide. This area generally has a firm, yet malleable and flexible feel to it. Shoulder cuts work well for tooling. Bend Leather Cut

Alex Brown Leather Biker Jacket

Chemicals used in the leather dyeing process generally require proper ventilation during use. Some can be toxic when breathed in, in large amounts, and others can be toxic when exposed to them for a long period of time.