UGREEN RJ45 Connector, 50 Pack Cat5e/Cat5 Ethernet Modular RJ45 Plugs, Gold Plated Crimp LAN Network End Plugs for Ethernet Cable

Product Information

Crimping tools are used to join or connect two components or pieces of material through compression forces. They work by squeezing the two parts together tightly enough to form a fairly permanent bond or seal. Different sorts of crimp tools have various additional functions along with this ability to compress and seal materials. Common examples include cutting, stripping, and bending.

Stranded conductor (stranded core) Cat5/Cat5e Ethernet cable tends to be used for establishing shorter runs between temporary or easily movable wired networks. Small office networks, such as those linking computers to a router via a short Cat5e patch cable or similar will generally be fine using stranded Ethernet wiring. Most standard Ethernet patch cables at lengths of 50 feet or less will tend to have stranded conductors. In modern domestic and commercial environments, RJ45 connectors are primarily used for plugging an internet-enabled device directly into hardware such as a modem, router, or server. The connectors themselves are the modular sets of fittings at either end of the physical data connection (Ethernet cable) joining one networked device to another. Try to avoid running cables parallel to power cables and never run the wire parallel to power wiring nearer than 6" away.F/FTP (Foil/Foil Twisted Pair): Both the individual twisted pairs and the cable have an added layer of foil shielding around them Keep cables away from devices which can introduce noise into them. Here's a short list: copy machines, electric heaters, speakers, printers, TV sets, fluorescent lights, copiers, welding machines, microwave ovens, telephones, fans, electric ovens, dryers, washing machines, and shop equipment.

Cat5 and Cat5e cables support speeds up to 100Mbps and have four twisted pairs of internal cables. Ethernet cable uses two of the four wires for its function, one for transferring data and the other for receiving data. When these two wires are wired incorrectly, the ethernet is smart enough to use the other two pairs from the four pairs. And if you want straight-through transmission, then you must align those colored wires using the diagram below. If you intend to make lots of cables, wiring them yourself can also be a considerable cost-saving measureCat5e cable spec dictates that it can carry data over a wired connection at speeds of either 10 Mbps, 100 Mbps, or 1000 Mbps (equal to 1 Gbps, and thus usually referred to as Gigabit Ethernet). You will often see this written as 10/100/1000 Ethernet. This means that if your local network (or incoming internet connection) runs at between 10-1000 Mbps/1 Gb (also known as a 1000BASE-T network), Cat5e Ethernet cable should be able to handle the required data throughput at full speed, with no loss or delay.