HIKVISION DS-2CD2347G2-LU (2.8 mm) 4MP ColorVu IP Turret Camera 24/7 Coloured Imaging with Microphone

Product Information

To access your system via a web browser just type in its IP address in your web browser for example http://192. firmware and they have said you should be able to download simply by loading the earlier firmware file - v5. The settings that you'll need to connect directly to the camera for AFTER you've set the rest using the NVR are - disabling the ColorVu LED completely (I think though this may have changed), altering the cameras microphone level and environmental noise filter. I'll just keep the LED light disabled for now and trigger outdoor lights to turn on a BlueIris event. Security Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.

Finally in the cameras webpage menu, you might want to lower the mic volume as it’s a bit loud by default at 80.It's easier to get it right first time following a guide than trying to sort it out later when you've registered it and it's not working. The DS-2C2347G2-LU now also draws from the same deep learning algorithm that is featured in AcuSense technology.

See my recent comments on post “choosing cameras for my home”) wait until it’s dark so you can see the effect in real-time of any changes you make. This camera utilises deep learning algorithms to reduce false alarms by focusing on human and vehicle targets. So with regard to most of the camera settings you can do them directly on the NVR and you don't need to be connected to internet or even the local network. Unless selecting a vari-focal camera (with an adjustable lens) It is important to select the correct camera lens option for where the camera is to be positioned.lens, normally such a lens would be used for an overview camera with a larger lens camera covering areas of interest. Please keep in mind that these LED lights are quite bright and remain switched on at low light levels until light levels increase. You will use Hik-Connect just to enable remote viewing of your system from a smartphone rather than for any configuration.